Tag Archives: Korry

Korry from OpenCockpits

Hello everyone,

I will begin this new section of my website about my project to build a Boeing 737 cockpit by testing the korrys I recently received from OpenCockpits. They are to be used in the Collins-style MCP.

The model I ordered is “Switch type Korry MON-OFF (momentary)” (reference 4TS14M) and it costs (at the time of writing) 15 euros each. The legend (text) and the color of the two parts (upper and lower) are to be specified as comments during the checkout.

The service from OpenCockpit is excellent and I received the korrys only a week after the order using normal postal service (OpenCockpit is located in Spain and I live in France). They were properly packed and well protected.

korry3

korry4

The larger black square seen on the above pictures near the connectors is a ring that can be used to secure the korry when moved to the top of the korry over the toothed area.

The korry is connected using the 6 pins headers at the bottom: pins 1 and 2 = +5 V and GND for the first LED, pins 3 and 4 = push-button, pins 5 and 6 = GND and +5 V for the second LED.

The LED are directly powered with 5 V without need for any external resistor. They consume 19 mA each.

First LED turned on:

korry2

First and second LED turned on:

korry1

There is almost no light leakage from one part of the korry to the other.

To conclude, this korry is almost perfect and relatively cheap. Thank you OpenCockpits!