The Remote Control allows to easily operates one locomotive and several accessories (switch…).
The first (wire) version of the remote control communicates with the DCC Command Station using the CAN bus.
Future versions of the remote control will use a wireless interface.
Hardware (version 1.0, May 2020)
The schematic is available:
This version is based on an Olimex STM32-H405 board that hosts the main microcontroler (an STM32F405).
The hardware project is licensed under the CERN-OHL-Pv2.
The firmware is available on GitLab: https://gitlab.com/guiduc/dcc/-/tree/master/remote_control/firmware
The version 0.1 (August 2020) is very limited: it only allows to control the speed, the direction and three fixed functions of one locomotive, at a fixed DCC address (3).
The roadmap for future versions is available in the README
The firmware is licensed under either of
at your option.